Spare honeycomb blind

Our products are fully custom-made. Enter the desired width and height of your honeycomb blind and we will take care of the rest. You do not have to take any margins into account, we calculate them ourselves. Please note! Before you start measuring, note any obstacles such as door and/or window fittings sticking out, heating pipes or inward-turning doors and windows.

Want to know how to measure? Check out our Measuring instructions!

Up to 350cm wide

Want a honeycomb blind that is wider than 297cm? Smartblinds can produce honeycomb blinds up to a width of 350cm. For now, this is not yet self-configurable. For more information, please contact our service.

1. Option A: Determining dimensions for mounting in the window
   
   Measure the width at the top of the window and measure the height at the centre of the window. Please note! We supply the honeycomb blind with a reduction of 3 mm on both sides. Specify the exact size of your window and we will make sure the honeycomb blind falls exactly in between. So do not make any reductions! In addition, allow for a system height of 10 cm due to possible obstacles such as inward-swinging doors and windows.
2. Option B: Determine dimensions for mounting on window
   
   Measure the width and height of the window, with a small overlap. We recommend an overlap of 5 cm on both sides. So add a total of 10 cm to the width measurement. To determine the height, add the package height of your honeycomb blind (see table below) to the height of your window. Do you want the honeycomb blind to continue at the bottom? Then decide how many extra centimetres you want in height.

You can choose to hang your blind inside the recess or outside the recess:

1. Inside the recess
   
   If you hang the honeycomb blind inside the recess, it is mounted between the walls of your window. With this choice, we therefore supply your honeycomb blind with a 3 mm reduction on both sides.
2. Outside the recess
   
   If you hang the honeycomb blind outside the recess, it is mounted on the wall and hangs over the window with overlap on both sides.

Want to know more about how to measure? View our measurement instructions here

At Smartblinds, you have the choice between 2 different motors. Read about the differences below, so you know which motor to choose.

Motionblinds Bluetooth motor

Operation possible via:

• Pull cord

• Remote control (can be added as an optional accessory)

• MotionBlinds Bluetooth app

  With the Motionblinds Bluetooth app, you can control Smartblinds indoors. In addition, you can set timers in the app when your blinds automatically move, regardless of whether you are at home or not.

• To connect to a home automation system (e.g. Homey, IFTTT or Home Assistant) or a smart home platform other than Apple HomeKit, we recommend you choose the Motionblinds Bluetooth Motor and connect it to your home automation system via a Motionblinds Wi-Fi bridge.

Eve Motionblinds Matter motor

Operation possible via:

• Pull cord

• Remote control (can be added as an optional accessory)

• Linking to your smart home

  The Eve Motionblinds Matter motor allows you to link your Smartblinds directly to your favourite smart home platform. This allows you to control your Smartblinds anywhere, anytime, set timers and add your Smartblinds to automations and scenes with other smart home devices. To connect to your smart home platform, you do need a smart hub that supports the Matter protocol.

By choosing a motor side, you determine on which side you want to operate and charge your Smartblinds. If you choose the left side, the motor, pull-down controller and charging port are located on the left side of the product. Would you like this to be on the right-hand side? Then choose right.

Would you also like to be able to control your curtains with a remote control? Then add it to your order! With one remote control, you can operate up to 5 different curtains.

Here you can fill in a reference for your assembled blind. That way you will soon know exactly which product is for which window in your house!

When you are looking for window coverings, it is important to determine beforehand what transparency you want in certain rooms. In bedrooms, for example, more blackout is usual than in the living room. Smartblinds fabrics can be divided into three different transparencies:

Blackout

Opacity: none - Light from outside is completely blocked and has no possibility to illuminate rooms.

Light filtering

Opacity: limited - Light from outside is obstructed, but not completely blocked.

Sheer

Opacity: full - Light from outside finds its way in, but the fabric offers the desired privacy.

Your blinds should, of course, match your interior. The colour and look of fabrics and materials can sometimes differ from reality from a screen or due to differences in light transmission. We therefore always recommend requesting free fabric samples in advance, so you can assess the fabric (colour) in real life!

Our systems are available in two sizes, small and large. The small system is suitable for small to medium-sized roller blinds. For large sized blinds, only a large system is possible. Our advice is to start by putting together the roller blind for your largest window in the house. If it turns out that you can only choose a large system for this blind, we recommend doing the same for the rest of your Smartblinds. This way you avoid having multiple Smartblinds in your home with different systems. Is your largest product also suitable for a small system? Then choose the system size that you prefer.

Below you will find the system height of the various systems, so that you can take this into account when ordering. Are you mounting your product in the window, but do you have a window that opens inwards? Then you can use this to check whether you have enough room for this.

Be aware! The system sizes below are all sizes for motorised products. Do you want to view the system sizes of our chain operated Smartblinds? Click the link below.

Dimensions bracket system small:

Dimensions bracket system large:

Dimensions cassette system small:

Dimensions cassette system large:

When putting together your honeycomb blinds, Smartblinds gives you a choice of two different types of systems:

Top down:

Top down & Bottom up:

Adding manual product to your order? Then contact our customer service team!

Our systems are available in white, grey, anthracite and black.

Colour information:

• White = RAL 9003
• Grey = RAL 7004
• Anthracite = RAL 7016
• Black = RAL 9011

For the honeycomb structure of your honeycomb blinds, you can choose between 25 mm and 45 mm. The 25 mm honeycomb is generally suitable for all windows. The 45 mm variant is a popular choice especially for large windows. Not sure which structure is the best choice for you? Then request our free fabric samples to evaluate them in your home. Would you like advice? Then feel free to contact us!